Chapter 4: Utility Commands 195
The following shows examples of the command.
(CN1610) (Config)# logging host google.com dns 214
(CN1610) (Config)# logging host 10.130.64.88 ipv4 214 6
(CN1610) (Config)# logging host 2000::150 ipv6 214 7
logging host
reconfigure
This command enables logging host reconfiguration.
Default
◆ port—514
◆ level—critical (2)
Format
logging host {
hostaddress
|
hostname
}
addresstype
{port severitylevel}
Mode Global Config
Parameter Description
hostaddress|hostname The IP address of the logging host.
address-type Indicates the type of address ipv4 or ipv6 or dns
being passed.
port A port number from 1 to 65535.
severitylevel Specify this value as either an integer from 0 to 7, or
symbolically through one of the following
keywords:
emergency (0), alert (1), critical (2),
error (3), warning (4), notice (5), info (6), or
debug (7).
Format
logging host reconfigure
hostindex
Mode Global Config
Parameter Description
hostindex Enter the Logging Host Index for which to change
the IP address.
To Next Page
Loading...
