NetApp CN1610 - Lacp Admin Key; No Lacp Admin Key; Lacp Collector Max-Delay; No Lacp Collector Max Delay

446 Port-Channel/LAG (802.3ad) Commands
lacp admin key Use this command to configure the administrative value of the key for the port-
channel. The value range of
key is 0 to 65535. This command can be used to
configure a single interface or a range of interfaces.
Note
This command is applicable only to port-channel interfaces.
no lacp admin key Use this command to configure the default administrative value of the key for the
port-channel.
lacp collector max-
delay
Use this command to configure the port-channel collector max delay. This
command can be used to configure a single interface or a range of interfaces.The
valid range of
delay is 0-65535.
Note
This command is applicable only to port-channel interfaces.
no lacp collector
max delay
Use this command to configure the default port-channel collector max delay.
Default 0x8000
Format
lacp admin key key
Mode Interface Config
Format
no lacp admin key
Mode Interface Config
Default 0x8000
Format
lacp collector max delay delay
Mode Interface Config
Format
no lacp collector max delay
Mode Interface Config