NetApp CN1610 - Port Lacpmode;No Port Lacpmode; Port Lacpmode Enable All; No Port Lacpmode Enable All; Port Lacptimeout (Interface Config)

Chapter 5: Switching Commands 455
port lacpmode This command enables Link Aggregation Control Protocol (LACP) on a port or
range of ports.
no port lacpmode This command disables Link Aggregation Control Protocol (LACP) on a port.
port lacpmode
enable all
This command enables Link Aggregation Control Protocol (LACP) on all ports.
no port lacpmode
enable all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
port lacptimeout
(Interface Config)
This command sets the timeout on a physical interface or range of interfaces of a
particular device type (actor or partner) to either long or short timeout.
Default enabled
Format
port lacpmode
Mode Interface Config
Format
no port lacpmode
Mode Interface Config
Format
port lacpmode enable all
Mode Global Config
Format
no port lacpmode enable all
Mode Global Config
Default long
Format
port lacptimeout {actor | partner} {long | short}
Mode Interface Config