Chapter 5: Switching Commands 485
DHCP Client Commands
FASTPATH can include vendor and configuration information in DHCP client
requests relayed to a DHCP server. This information is included in DHCP Option
60, Vendor Class Identifier. The information is a string of 128 octets.
dhcp client vendor-
id-option
This command enables the inclusion of DHCP Option-60, Vendor Class
Identifier included in the requests transmitted to the DHCP server by the DHCP
client operating in the FASTPATH switch.
no dhcp client
vendor-id-option
This command disables the inclusion of DHCP Option-60, Vendor Class
Identifier included in the requests transmitted to the DHCP server by the DHCP
client operating in the FASTPATH switch.
dhcp client vendor-
id-option-string
This parameter sets the DHCP Vendor Option-60 string to be included in the
requests transmitted to the DHCP server by the DHCP client operating in the
FASTPATH switch.
no dhcp client
vendor-id-option-
string
This parameter clears the DHCP Vendor Option-60 string.
Format
dhcp client vendor-id-option
string
Mode Global Config
Format
no dhcp client vendor-id-option
Mode Global Config
Format
dhcp client vendor-id-option-string
string
Mode Global Config
Format
no dhcp client vendor-id-option-string
Mode Global Config
To Next Page
Loading...
