NetApp CN1610 - Show Loginsession Long

52 Access Commands
show loginsession
long
This command displays the complete user names of the users currently logged in
to the switch.
The following shows an example of the command.
(CN1610) #show loginsession long
User Name
------------
admin
test1111test1111test1111test1111test1111test1111test1111test1111
Mode Privileged EXEC
Term Definition
ID Login Session ID.
User Name The name the user entered to log on to the system.
Connection From IP address of the remote client machine or EIA-232
for the serial port connection.
Idle Time Time this session has been idle.
Session Time Total time this session has been connected.
Session Type Shows the type of session, which can be telnet,
serial, or SSH.
Format
show loginsession long
Mode Privileged EXEC