NetApp CN1610 - Show Lldp Local-Device

Chapter 5: Switching Commands 555
The following shows example CLI display output for the command.
(FASTPATH Switching) #show lldp remote-device detail 0/7
LLDP Remote Device Detail
Local Interface: 0/7
Remote Identifier: 2
Chassis ID Subtype: MAC Address
Chassis ID: 00:FC:E3:90:01:0F
Port ID Subtype: MAC Address
Port ID: 00:FC:E3:90:01:11
System Name:
System Description:
Port Description:
System Capabilities Supported:
System Capabilities Enabled:
Time to Live: 24 seconds
show lldp local-
device
Use this command to display summary information about the advertised LLDP
local data. This command can display summary information or detail for each
interface.
Time To Live The amount of time (in seconds) the remote device's
information received in the LLDPDU should be
treated as valid information.
Term Definition
Format
show lldp local-device {slot/port | all}
Mode Privileged EXEC
Term Definition
Interface The interface in a slot/port format.
Port ID The port ID associated with this interface.
Port Description The port description associated with the interface.