NetApp CN1610 - Logging Host Remove; Logging Syslog; No Logging Syslog; Logging Syslog Port;No Logging Syslog Port

196 Logging Commands
logging host
remove
This command disables logging to host. See “show logging hosts” on page 198
for a list of host indexes.
logging syslog This command enables syslog logging.
no logging syslog This command disables syslog logging.
logging syslog port This command enables syslog logging. The
portid parameter is an integer with a
range of 1-65535.
no logging syslog
port
This command disables syslog logging.
show logging This command displays logging configuration information.
Format
logging host remove hostindex
Mode Global Config
Format
logging syslog
Mode Global Config
Format
no logging syslog
Mode Global Config
Default disabled
Format
logging syslog port portid
Mode Global Config
Format
no logging syslog port
Mode Global Config