Chapter 4: Utility Commands 197
The following shows example CLI display output for the command.
(CN1610) #show logging
Logging Client Local Port : 514
Logging Client Source Interface : (not configured)
Format
show logging
Mode Privileged EXEC
Term Definition
Logging Client Local
Port
Port on the collector/relay to which syslog messages
are sent.
Logging Client
Source Interface
Shows the configured syslog source-interface
(source IP address).
CLI Command
Logging
Shows whether CLI Command logging is enabled.
Console Logging Shows whether console logging is enabled.
Console Logging
Severity Filter
The minimum severity to log to the console log.
Messages with an equal or lower numerical severity
are logged.
Buffered Logging Shows whether buffered logging is enabled.
Persistent Logging Shows whether persistent logging is enabled.
Persistent Logging
Severity Filter
The minimum severity at which the logging entries
are retained after a system reboot.
Syslog Logging Shows whether syslog logging is enabled.
Log Messages
Received
Number of messages received by the log process.
This includes messages that are dropped or ignored.
Log Messages
Dropped
Number of messages that could not be processed due
to error or lack of resources.
Log Messages
Relayed
Number of messages sent to the collector/relay.
To Next Page
Loading...
