NetApp CN1610 - Show Spanning-Tree Mst Port Summary Active

Chapter 5: Switching Commands 347
STP STP Port
Interface Mode Type State Role Desc
--------- -------- ------- ----------------- ---------- ----------
0/1 Enabled Disabled Disabled
The following shows example CLI display output for the command using a LAG
interface number.
(CN1610) >show spanning-tree mst port summary 0 lag 1
MST Instance ID................................ CST
STP STP Port
Interface Mode Type State Role Desc
--------- -------- ------- ----------------- ---------- ----------
3/1 Enabled Disabled Disabled
show spanning-tree
mst port summary
active
This command displays settings for the ports within the specified multiple
spanning tree instance that are active links.
Format
show spanning-tree mst port summary mstid active
Mode ◆ Privileged EXEC
◆ User EXEC
Term Definition
MST Instance ID The ID of the existing MST instance.
Interface slot/port
STP Mode Indicates whether spanning tree is enabled or
disabled on the port.
Type Currently not used.
STP State The forwarding state of the port in the specified
spanning tree instance.