NetApp CN1610 - Show Lldp Statistics

Chapter 5: Switching Commands 551
show lldp statistics Use this command to display the current LLDP traffic and remote table statistics
for a specific interface or for all interfaces.
The table contains the following column headings:
TLVs Shows whether the interface sends optional TLVs in
the LLDPDUs. The TLV codes can be 0 (Port
Description), 1 (System Name), 2 (System
Description), or 3 (System Capability).
Mgmt Shows whether the interface transmits system
management address information in the LLDPDUs.
Term Definition
Format
show lldp statistics {slot/port | all}
Mode Privileged EXEC
Term Definition
Last Update The amount of time since the last update to the
remote table in days, hours, minutes, and seconds.
Total Inserts Total number of inserts to the remote data table.
Total Deletes Total number of deletes from the remote data table.
Total Drops Total number of times the complete remote data
received was not inserted due to insufficient
resources.
Total Ageouts Total number of times a complete remote data entry
was deleted because the Time to Live interval
expired.
Term Definition
Interface The interface in slot/port format.