NetApp CN1610 - No Protocol Vlan Group All; Show Port Protocol; Vlan Pvid

360 VLAN Commands
no protocol vlan
group all
This command removes all interfaces from this protocol-based VLAN group that
is identified by this
groupid.
show port protocol This command displays the Protocol-Based VLAN information for either the
entire system, or for the indicated group.
vlan pvid This command changes the VLAN ID on an interface or range of interfaces.
Default none
Format
protocol vlan group all groupid
Mode Global Config
Format
no protocol vlan group all groupid
Mode Global Config
Format
show port protocol { groupid | all}
Mode Privileged EXEC
Term Definition
Group Name The group name of an entry in the Protocol-based
VLAN table.
Group ID The group identifier of the protocol group.
VLAN The VLAN associated with this Protocol Group.
Protocol(s) The type of protocol(s) for this group.
Interface(s) Lists the slot/port interface(s) that are associated
with this Protocol Group.