NetApp CN1610 - Macfilter Adddest; No Macfilter Adddest; Macfilter Adddest All

472 Static MAC Filtering Commands
The vlanid parameter must identify a valid VLAN.
macfilter adddest Use this command to add the interface or range of interfaces to the destination
filter set for the MAC filter with the given
macaddr and VLAN of vlanid. The
macaddr parameter must be specified as a 6-byte hexadecimal number in the
format of b1:b2:b3:b4:b5:b6. The
vlanid parameter must identify a valid
VLAN.
Note
Configuring a destination port list is only valid for multicast MAC addresses.
no macfilter
adddest
This command removes a port from the destination filter set for the MAC filter
with the given
macaddr and VLAN of vlanid. The macaddr parameter must
be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
vlanid parameter must identify a valid VLAN.
macfilter adddest all This command adds all interfaces to the destination filter set for the MAC filter
with the given
macaddr and VLAN of vlanid. The macaddr parameter must
be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
vlanid parameter must identify a valid VLAN.
Note
Configuring a destination port list is only valid for multicast MAC addresses.
Format
no macfilter macaddr vlanid
Mode Global Config
Format
macfilter adddest macaddr
Mode Interface Config
Format
no macfilter adddest macaddr
Mode Interface Config
Format
macfilter adddest all macaddr