536 MLD Snooping Querier Commands
no set mld querier Use this command to disable MLD Snooping Querier on the system. Use the
optional parameter
address to reset the querier address.
set mld querier
query_interval
Use this command to set the MLD Querier Query Interval time. It is the amount
of time in seconds that the switch waits before sending another general query.
no set mld querier
query_interval
Use this command to set the MLD Querier Query Interval time to its default
value.
set mld querier
timer expiry
Use this command to set the MLD Querier timer expiration period. It is the time
period that the switch remains in Non-Querier mode once it has discovered that
there is a Multicast Querier in the network.
no set mld querier
timer expiry
Use this command to set the MLD Querier timer expiration period to its default
value.
Format
no set mld querier
[
vlan-id
][
address
]
Mode ◆ Global Config
◆ VLAN Mode
Default 60 seconds
Format
set mld querier query_interval
1-1800
Mode Global Config
Format
no set mld querier query_interval
Mode Global Config
Default 60 seconds
Format
set mld querier timer expiry
60-300
Mode Global Config
To Next Page
Loading...
