552 LLDP (802.1AB) Commands
show lldp remote-
device
Use this command to display summary information about remote devices that
transmit current LLDP data to the system. You can show information about
LLDP remote data received on all ports or on a specific port.
TX Total Total number of LLDP packets transmitted on the
port.
RX Total Total number of LLDP packets received on the port.
Discards Total number of LLDP frames discarded on the port
for any reason.
Errors The number of invalid LLDP frames received on the
port.
Ageouts Total number of times a complete remote data entry
was deleted for the port because the Time to Live
interval expired.
TVL Discards The number of TLVs discarded.
TVL Unknowns Total number of LLDP TLVs received on the port
where the type value is in the reserved range, and not
recognized.
TLV MED The total number of LLDP-MED TLVs received on
the interface.
TLV 802.1 The total number of LLDP TLVs received on the
interface which are of type 802.1.
TLV 802.3 The total number of LLDP TLVs received on the
interface which are of type 802.3.
Term Definition
Format
show lldp remote-device {slot/port | all}
Mode Privileged EXEC
To Next Page
Loading...
