NetApp CN1610 - Show Ip Arp Inspection Statistics

504 Dynamic ARP Inspection Commands
The following shows example CLI display output for the command.
(CN1610) #show ip arp inspection vlan 10-12
Source Mac Validation : Disabled
Destination Mac Validation : Disabled
IP Address Validation : Disabled
Vlan Configuration Log Invalid ACL Name Static flag
---- ------------- ----------- --------- ----------
10 Enabled Enabled H2 Enabled
11 Disabled Enabled
12 Enabled Disabled
show ip arp
inspection statistics
Use this command to display the statistics of the ARP packets processed by
Dynamic ARP Inspection. Give the vlan-list argument and the command displays
the statistics on all DAI-enabled VLANs in that list. Give the single vlan
argument and the command displays the statistics on that VLAN. If no argument
is included, the command lists a summary of the forwarded and dropped ARP
packets.
ACL Name The ARP ACL Name, if configured on the VLAN.
Static Flag If the ARP ACL is configured static on the VLAN.
Term Definition
Format
show ip arp inspection statistics [vlan vlan-list]
Mode ◆ Privileged EXEC
◆ User EXEC
Term Definition
VLAN The VLAN ID for each displayed row.
Forwarded The total number of valid ARP packets forwarded in
this VLAN.
Dropped The total number of not valid ARP packets dropped
in this VLAN.