NetApp CN1610 - Clear Isdp Table; Show Isdp

Chapter 5: Switching Commands 585
clear isdp table This command clears entries in the ISDP table.
show isdp This command displays global ISDP settings.
Format
clear isdp table
Mode Privileged EXEC
Format
show isdp
Mode Privileged EXEC
Term Definition
Timer The frequency with which this device sends ISDP
packets. This value is given in seconds.
Hold Time The length of time the receiving device should save
information sent by this device. This value is given
in seconds.
Versi on 2
Advertisements
The setting for sending ISDPv2 packets. If disabled,
version 1 packets are transmitted.
Neighbors table time
since last change
The amount of time that has passed since the ISPD
neighbor table changed.
Device ID The Device ID advertised by this device. The format
of this Device ID is characterized by the value of the
Device ID Format object.
Device ID Format
Capability
Indicates the Device ID format capability of the
device.
◆ serialNumber indicates that the device uses a
serial number as the format for its Device ID.
◆ macAddress indicates that the device uses a
Layer 2 MAC address as the format for its
Device ID.
◆ other indicates that the device uses its
platform-specific format as the format for its
Device ID.