Chapter 5: Switching Commands 359
no protocol group This command removes the vlanid from this protocol-based VLAN group that
is identified by this
groupid.
protocol vlan group This command adds a physical interface or a range of interfaces to the protocol-
based VLAN identified by
groupid. You can associate multiple interfaces with a
group, but you can only associate each interface and protocol combination with
one group. If adding an interface to a group causes any conflicts with protocols
currently associated with the group, this command fails and the interface(s) are
not added to the group.
no protocol vlan
group
This command removes the interface from this protocol-based VLAN group that
is identified by this
groupid.
protocol vlan group
all
This command adds all physical interfaces to the protocol-based VLAN
identified by
groupid. You can associate multiple interfaces with a group, but
you can only associate each interface and protocol combination with one group.
If adding an interface to a group causes any conflicts with protocols currently
associated with the group, this command will fail and the interface(s) will not be
added to the group.
Mode VLAN Config
Format
no protocol group
groupid vlanid
Mode VLAN Config
Default none
Format
protocol vlan group
groupid
Mode Interface Config
Format
no protocol vlan group
groupid
Mode Interface Config
To Next Page
Loading...
