NetApp CN1610 - Boot Host Retrycount; No Boot Host Retrycount; Boot Host Dhcp; No Boot Host Dhcp

Chapter 4: Utility Commands 137
boot host
retrycount
Use this command to set the number of attempts to download a configuration file
from the TFTP server.
no boot host
retrycount
Use this command to set the number of attempts to download a configuration file
to the default value.
boot host dhcp Use this command to enable AutoInstall on the switch for the next reboot cycle.
The command does not change the current behavior of AutoInstall and saves the
command to NVRAM.
no boot host dhcp Use this command to disable AutoInstall for the next reboot cycle.
Format
boot autoinstall {start | stop}
Mode Privileged EXEC
Default 3
Format
boot host retrycount 1-3
Mode Privileged EXEC
Format
no boot host retrycount
Mode Privileged EXEC
Default enabled
Format
boot host dhcp
Mode Privileged EXEC
Format
no boot host dhcp
Mode Privileged EXEC