110 RADIUS Commands
no radius server
host
The no version of this command deletes the configured server entry from the list
of configured RADIUS servers. If the RADIUS authenticating server being
removed is the active server in the servers that are identified by the same server
name, then the RADIUS client selects another server for making RADIUS
transactions. If the 'auth' token is used, the previously configured RADIUS
authentication server is removed from the configuration. Similarly, if the 'acct'
token is used, the previously configured RADIUS accounting server is removed
from the configuration. The
ipaddr|dnsname parameter must match the IP
address or DNS name of the previously configured RADIUS authentication /
accounting server.
The following shows an example of the command.
(CN1610) (Config) #radius server host acct 192.168.37.60
(CN1610) (Config) #radius server host acct 192.168.37.60 port 1813
(CN1610) (Config) #radius server host auth 192.168.37.60 name
Network1_RS port 1813
(CN1610) (Config) #radius server host acct 192.168.37.60 name
Network2_RS
(CN1610) (Config) #no radius server host acct 192.168.37.60
radius server key This command configures the key to be used in RADIUS client communication
with the specified server. Depending on whether the 'auth' or 'acct' token is used,
the shared secret is configured for the RADIUS authentication or RADIUS
accounting server. The IP address or hostname provided must match a previously
configured server. When this command is executed, the secret is prompted.
Text-based configuration supports Radius server’s secrets in encrypted and non-
encrypted format. When you save the configuration, these secret keys are stored
in encrypted format only. If you want to enter the key in encrypted format, enter
the key along with the encrypted keyword. In the “show running-config” on
page 177 command’s display, these secret keys are displayed in encrypted
format. You cannot show these keys in plain text format.
servername The alias name to identify the server.
Field Description
Format
no radius server host {auth | acct} {
ipaddr|dnsname
}
Mode Global Config
To Next Page
Loading...
