NetApp CN1610 - No Ip Domain Name; Ip Domain List; No Ip Domain List; Ip Name Server;No Ip Name Server

238 DNS Client Commands
no ip domain name Use this command to remove the default domain name configured using the ip
domain name
command.
ip domain list Use this command to define a list of default domain names to complete
unqualified names. By default, the list is empty. Each name must be no more than
256 characters, and should not include an initial period. The default domain
name, configured using the
ip domain name command, is used only when the
default domain name list is empty. A maximum of 32 names can be entered in to
this list.
no ip domain list Use this command to delete a name from a list.
ip name server Use this command to configure the available name servers. Up to eight servers
can be defined in one command or by using multiple commands. The parameter
server-address is a valid IPv4 or IPv6 address of the server. The preference
of the servers is determined by the order they were entered.
no ip name server Use this command to remove a name server.
Format
no ip domain name
Mode Global Config
Default none
Format
ip domain list name
Mode Global Config
Format
no ip domain list name
Mode Global Config
Format
ip name-server server-address1 [ server-
address2...server-address8
]
Mode Global Config