NetApp CN1610 - No Spanning-Tree Bpduguard; Spanning-Tree Bpdumigrationcheck; Spanning-Tree Configuration Name; No Spanning-Tree Configuration Name

322 Spanning Tree Protocol Commands
no spanning-tree
bpduguard
Use this command to disable BPDU Guard on the switch.
spanning-tree
bpdumigrationchec
k
Use this command to force a transmission of rapid spanning tree (RSTP) and
multiple spanning tree (MSTP) BPDUs. Use the slot/port
parameter to transmit a
BPDU from a specified interface, or use the
all keyword to transmit RST or
MST BPDUs from all interfaces. This command forces the BPDU transmission
when you execute it, so the command does not change the system configuration
or have a no version.
spanning-tree
configuration name
This command sets the Configuration Identifier Name for use in identifying the
configuration that this switch is currently using. The
name is a string of up to 32
characters.
no spanning-tree
configuration name
This command resets the Configuration Identifier Name to its default.
Mode Global Config
Default disabled
Format
no spanning-tree bpduguard
Mode Global Config
Format
spanning-tree bpdumigrationcheck {slot/port | all}
Mode Global Config
Default base MAC address in hexadecimal notation
Format
spanning-tree configuration name name
Mode Global Config
Format
no spanning-tree configuration name
Mode Global Config