NetApp CN1610 - Dhcp L2 Relay Remote-ID Subscription; No Dhcp L2 Relay Remote-ID Subscription; Dhcp L2 Relay Remote-ID Vlan

478 DHCP L2 Relay Agent Commands
dhcp l2relay
remote-id
subscription
This command sets the Option-82 Remote-ID string for a given service
subscription identified by
subscription-string on a given interface or range
of interfaces. The
subscription-string is a character string which needs to
be matched with a configured DOT1AD subscription string for correct operation.
The
remoteid-string is a character string. When remote-id string is set using
this command, all Client DHCP requests that fall under this service subscription
are added with Option-82 Remote-id as the configured remote-id string.
no dhcp l2relay
remote-id
subscription
This command resets the Option-82 Remote-ID string for a given service
subscription identified by
subscription-string on a given interface. The
subscription-string is a character string which needs to be matched with a
configured DOT1AD subscription string for correct operation. When remote-id
string is reset using this command, the Client DHCP requests that fall under this
service subscription are not added with Option-82 Remote-id.
dhcp l2relay
remote-id vlan
This parameter sets the DHCP Option-82 Remote ID for a VLAN and subscribed
service (based on subscription-name).
Default empty string
Format
dhcp l2relay remote-id remoteid-string subscription-
name
subscription-string
Mode Interface Config
Format
no dhcp l2relay remote-id remoteid-string
subscription-name
subscription-string
Mode Interface Config
Format
dhcp l2relay remote-id remote-id-string vlan vlan-
list
Mode Global Config