Chapter 5: Switching Commands 461
show port-channel
brief
This command displays the static capability of all port-channel (LAG) interfaces
on the device as well as a summary of individual port-channel interfaces.
For each port-channel the following information is displayed:
System-ID Represents the administrative value of the
Aggregation Port’s protocol Partner’s System ID.
Admin Key The administrative value of the Key for the protocol
Partner.
Port Priority The administrative value of the Key for protocol
Partner.
Port-ID The administrative value of the port number for the
protocol Partner.
Admin State The administrative values of the actor state for the
protocol Partner.
Parameter Description
Format
show port-channel brief
Mode User EXEC
Term Definition
Logical Interface The slot/port of the logical interface.
Port-channel Name The name of port-channel (LAG) interface.
Link-State Shows whether the link is up or down.
Trap Flag Shows whether trap flags are enabled or disabled.
Type Shows whether the port-channel is statically or
dynamically maintained.
Mbr Ports The members of this port-channel.
Active Ports The ports that are actively participating in the port-
channel.
To Next Page
Loading...
