NetApp CN1610 - Show Radius

114 RADIUS Commands
(CN1610)# show radius servers name Default-RADIUS-Server
RADIUS Server Name............................. CoA-Server-1
Current Server IP Address...................... 1.1.1.1
Number of Retransmits.......................... 3
Timeout Duration............................... 15
Deadtime....................................... 0
Port........................................... 3799
Source IP...................................... 10.27.9.99 <-
switch
RADIUS Accounting Mode......................... Disabled
Secret Configured.............................. Yes
Message Authenticator.......................... Enable
Number of CoA Requests Received...................... 203
Number of CoA ACK Responses Sent..................... 111
Number of CoA NAK Responses Sent...................... 37
Number of Coa Requests Ignored........................ 55
Number of CoA Missing/Unsupported Attribute Requests..... 18
Number of CoA Session Context Not Found Requests......... 5
Number of CoA Invalid Attribute Value Requests... 11
Number of Administratively Prohibited Requests.........3
show radius This command displays the values configured for the global parameters of the
RADIUS client.
Format
show radius
Mode Privileged EXEC
Output Description
Number of
Configured
Authentication
Servers
The number of RADIUS Authentication servers that
have been configured.
Number of
Configured
Accounting Servers
The number of RADIUS Accounting servers that
have been configured.