NetApp CN1610 - Chapter 5 Switching Commands

Chapter 5: Switching Commands 307
5
Switching Commands
This chapter describes the switching commands available in the FASTPATH CLI.
The Switching Commands chapter includes the following sections:
◆ “Port Configuration Commands” on page 309
◆ “Spanning Tree Protocol Commands” on page 318
◆ “VLAN Commands” on page 351
◆ “Double VLAN Commands” on page 369
◆ “Private VLAN Commands” on page 373
◆ “Voice VLAN Commands” on page 382
◆ “Provisioning (IEEE 802.1p) Commands” on page 385
◆ “Provisioning (IEEE 802.1p) Commands” on page 385
◆ “Asymmetric Flow Control” on page 386
◆ “Protected Ports Commands” on page 388
◆ “GARP Commands” on page 391
◆ “GVRP Commands” on page 394
◆ “GMRP Commands” on page 397
◆ “Port-Based Network Access Control Commands” on page 401
◆ “802.1X Supplicant Commands” on page 428
◆ “Storm-Control Commands” on page 433
◆ “Link Local Protocol Filtering Commands” on page 442
◆ “Port-Channel/LAG (802.3ad) Commands” on page 444
◆ “Port-Channel/LAG (802.3ad) Commands” on page 444
◆ “Port Mirroring Commands” on page 466
◆ “Static MAC Filtering Commands” on page 471
◆ “DHCP L2 Relay Agent Commands” on page 476
◆ “DHCP Client Commands” on page 485
◆ “DHCP Snooping Configuration Commands” on page 487
◆ “Dynamic ARP Inspection Commands” on page 499
◆ “IGMP Snooping Configuration Commands” on page 508
◆ “IGMP Snooping Querier Commands” on page 519
◆ “MLD Snooping Commands” on page 524
◆ “MLD Snooping Querier Commands” on page 535
◆ “Port Security Commands” on page 540