Chapter 4: Utility Commands 181
--More-- or (q)uit
interface 0/1
description 'intf1'
exit
router ospf
exit
exit
The following shows example CLI display output for the command using the
backup-config parameter.
(CN1610) #show backup-config
!Current Configuration:
!
!System Description "Quanta LB6M, 8.1.14.41, Linux 2.6.27.47, U-
Boot 2009.06 (Apr 19 2011 - 15:57:06)"
!System Software Version "8.1.14.41"
!System Up Time "0 days 0 hrs 48 mins 19 secs"
!Additional Packages BGP-4,QOS,IPv6,IPv6
Management,Routing,Data Center
!Current SNTP Synchronized Time: Not Synchronized
!
vlan database
vlan 10
exit
configure
ipv6 router ospf
exit
line console
exit
line telnet
exit
line ssh
exit
!
--More-- or (q)uit
interface 0/1
description 'intf1'
exit
router ospf
exit
exit
The following shows example CLI display output for the command using the
factory-defaults parameter.
(CN1610) #show factory-defaults
!Current Configuration:
!
To Next Page
Loading...
