Chapter 4: Utility Commands 191
The following shows example CLI display output for the command.
(CN1610) #show hardware
Switch: 1
Unit The switch unit number in which the power supply
is installed, which is always 1.
Power Supply The power supply identifier.
State Indicates whether the power supply is installed.
Part Number &
Revision
The power supply part number and revision.
Mfg Part Number &
Revision
The power supply part number assigned by the
manufacturer and its revision number.
Serial Number The serial number of the power supply.
Date Code The date when the power supply was manufactured,
which is in YYYYMMDD format.
Fan Tray Hardware Detail
Unit The switch unit number in which the fan tray is
installed, which is always 1.
Fan Tray The fan tray identifier.
State Indicates whether the fan tray is installed.
Part Number and Rev The fan tray part number and revision.
SFP Module Hardware Data
Status of SFP Module Indicates whether one of more SFP modules is
installed.
SFP Vendor The name of the company who made the SFP
module.
SFP Part Number The vendor-assigned part number for the SFP.
SFP Serial Number The serial number of the SFP module.
Term Definition
To Next Page
Loading...
