Chapter 2: Using the Command-Line Interface 19
Mail Server Config From the Global Config
mode, enter
mail-server address.
To exit to the Global
Config mode, enter
exit
. To return to the
Privileged EXEC
mode, enter
Ctrl-Z
.
Policy-Map
Config
From the Global Config
mode, enter
policy-map
.
To exit to the Global
Config mode, enter
exit
. To return to the
Privileged EXEC
mode, enter
Ctrl-Z
.
Policy-Class-Map
Config
From the Policy Map mode,
enter
class
.
To exit to the Policy
Map mode, enter
exit
.
To return to the
Privileged EXEC
mode, enter
Ctrl-Z
.
Class-Map
Config
From the Global Config
mode, enter
class-map
, and specify the
optional keyword
ipv4
to
specify the Layer 3 protocol
for this class.
To exit to the Global
Config mode, enter
exit
. To return to the
Privileged EXEC
mode, enter
Ctrl-Z
.
MAC Access-list
Config
From the Global Config
mode, enter
mac access-list
extended name
.
To exit to the Global
Config mode, enter
exit
. To return to the
Privileged EXEC
mode, enter
Ctrl-Z
.
TACACS Config From the Global Config
mode, enter
tacacs-server
host ip-addr
, where
ip-
addr
is the IP address of the
TACACS server on your
network.
To exit to the Global
Config mode, enter
exit
. To return to the
Privileged EXEC
mode, enter
Ctrl-Z
.
Command Mode Prompt Mode Description
To Next Page
Loading...
