NetApp CN1610 - Page 223

220 System Utility and Clear Commands
For FTP, TFTP, SFTP and SCP, the ipaddr|hostname parameter is the IP
address or host name of the server,
filepath is the path to the file, and
filename is the name of the file you want to upload or download. For SFTP and
SCP, the
username parameter is the username for logging into the remote server
via SSH.
Note
ip6address is also a valid parameter for routing packages that support IPv6.
To copy OpenFlow SSL certificates to the switch using TFTP or XMODEM,
using only the following options pertinent to the OpenFlow SSL certificates.
CAUTION
Remember to upload the existing fastpath.cfg file off the switch prior to loading a
new release image in order to make a backup.
Format
copy [<mode/file>] nvram:{openflow-ssl-ca-cert |
openflow-ssl-cert | openflow-ssl-priv-key}
Mode Privileged EXEC
Source Destination Description
nvram:applicati
on:
sourcefilenam
e
url
Filename of source application file.
nvram:backup-
config
nvram:startup
-config
Copies the backup configuration to
the startup configuration.
nvram:clibanner url
Copies the CLI banner to a server.