Chapter 5: Switching Commands 317
The following shows example CLI display output for the command.
(Broadcom FASTPATH Switching) #show port description 0/1
Interface...........0/1
ifIndex.............1
Description.........
MAC address.........00:10:18:82:0C:10
Bit Offset Val......1
Format
show port description slot/port
Mode Privileged EXEC
Term Definition
Interface slot/port
ifIndex The interface index number associated with the port.
Description The alpha-numeric description of the interface
created by the command ādescriptionā on page 310.
MAC address The MAC address of the port. The format is 6 two-
digit hexadecimal numbers that are separated by
colons, for example 01:23:45:67:89:AB.
Bit Offset Val The bit offset value.
To Next Page
Loading...
