530 MLD Snooping Commands
When you specify the unit/slot/port values, the following information
displays.
When you specify a value for
vlanid, the following information appears.
Interfaces Enabled for
MLD Snooping
Interfaces on which MLD Snooping is enabled.
MLD Control Frame
Count
Displays the number of MLD Control frames that
are processed by the CPU.
VLANs Enabled for
MLD Snooping
VLANs on which MLD Snooping is enabled.
Term Definition
MLD Snooping
Admin Mode
Indicates whether MLD Snooping is active on the
interface.
Fast Leave Mode Indicates whether MLD Snooping Fast Leave is
active on the VLAN.
Group Membership
Interval
Shows the amount of time in seconds that a switch
will wait for a report from a particular group on a
particular interface, which is participating in the
VLAN, before deleting the interface from the entry.
This value may be configured.
Max Response Time Displays the amount of time the switch waits after it
sends a query on an interface, participating in the
VLAN, because it did not receive a report for a
particular group on that interface. This value may be
configured.
Multicast Router
Present Expiration
Time
Displays the amount of time to wait before removing
an interface that is participating in the VLAN from
the list of interfaces with multicast routers attached.
The interface is removed if a query is not received.
This value may be configured.
Term Definition
To Next Page
Loading...
