686 IPv6 Access Control List Commands
The following shows example CLI display output for the command.
(CN1610) #show ipv6 access-lists ip61
ACL Name: ip61
Outbound Interface(s): control-plane
Rule Number: 1
Action......................................... permit
Match Every.................................... FALSE
Protocol....................................... 17(udp)
Committed Rate................................. 32
Committed Burst Size........................... 16
Flow Label The value specified for IPv6 Flow Label.
Log Displays when you enable logging for the rule.
Assign Queue The queue identifier to which packets matching this
rule are assigned.
Mirror Interface The slot/port to which packets matching this rule are
copied.
Redirect Interface The slot/port to which packets matching this rule are
forwarded.
Time Range Name Displays the name of the time-range if the IPv6 ACL
rule has referenced a time range.
Rule Status Status (Active/Inactive) of the IPv6 ACL rule.
Term Definition
To Next Page
Loading...
