Epson AcuLaser CX11 - Controller; Software

EPSON AcuLaser CX11/CX11F Revision B
19
1.1.4 Controller
 New ASIC for controlling scanning and copying, and a FAX controller are added
to the controller for host-based printer.
 CPU : TX4955 (192MHz)
 RAM : Standard 128 MB (expandable up to 576 MB)
 Network I/F board (Cobalt)
 Control panel with a large LCD (with backlight)
 Built-in Interfaces
 USB2.0HS
 Ethernet (10Base/100Base-T) (standard or option)
 Fax modular (The AcuLaser CX11F only)
1.1.5 Software
 ESC/PageS03 installed
 A wide variety of copy modes
 Copy Mode : Text, Photos, Text/Photos, and High resolution
 2 in 1 copy is available
 Push-type scan (Enables to send scanned data to another PC via network)
Support both Local TWAIN and Network TWAIN
 The ROM is used for all destination models
Network I/F board (Cobalt) compatible