EPSON AcuLaser CX11/CX11F Revision B
29
1.2.2 Printer Section
1.2.2.1 Process Specifications & System
Printing method : Semiconductor laser beam scanning and dry
electrophotographic process with two ingredients
Light source : Semiconductor laser
Photoconductor : Organic photoconductor
Charging : Roller charging system
Development : Two ingredients, None-contact developing system
Toner : Made up of two nonmagnetic ingredients
Primary transfer : Intermediate transfer belt method
Fixing : Heat roller and fuser belt system
1.2.2.2 Printer Basic Specifications
RESOLUTION
600dpi
FIRST PRINT TIME
The time from receiving the Start command to when trailing edge of the paper leaves
the paper eject roller.
Note that the time given in the tables below does not apply when the printer is in the
conditions described in “1.2.2.7 Printer Engine Restrictions” (p39).
Table 1-12. Monochrome mode (Unit: second or less)
Paper size
Simplex printing
Standard Low speed
A4 9 17
LT 9 17
Table 1-13. Color mode (Unit: second or less)
Paper size
Simplex printing
Standard
Low speed 1
Low
speed 2
Thick/Extra
Thick Paper
Label/Coated Paper Envelop
A4 17 27 24 27 28
LT 17 27 24 27 28
To Next Page
Loading...
Need help?
General
