EasyManuals Logo

Epson AcuLaser CX11 Service Manual

Epson AcuLaser CX11
668 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #145 background imageLoading...
Page #145 background image
EPSON AcuLaser CX11/CX11F Revision B
TROUBLESHOOTING Printer 147
OTHER ERRORS AND WARNINGS
Table 3-10. List of Errors and Warnings
Class Panel Message Error LED Description See FIP
Warning
Y Toner Low
---
The toner supply time of the Yellow toner cartridge has reached the preset time. The printer, however, can be operated.
64 (p.237)
M Toner Low
---
The toner supply time of the Magenta toner cartridge has reached the preset time. The printer, however, can be operated.
65 (p.238)
C Toner Low
---
The toner supply time of the Cyan toner cartridge has reached the preset time. The printer, however, can be operated.
66 (p.239)
K Toner Low
---
The toner supply time of the Black toner cartridge has reached the preset time. The printer, however, can be operated.
67 (p.240)
Worn Photoconductor
---
SENSOR TNER FULL of the Waste Toner Box has detected a toner full state. The printer, however, can operated.
68 (p.241)
---
The number of drum rotations has exceeded the specified value. The printer, however, can be operated.
69 (p.242)
Error
Install Y TnrCart
ON
The Yellow toner cartridge is not mounted.
1 (p.153)
Install M TnrCart
ON
The Magenta toner cartridge is not mounted.
2 (p.154)
Install C TnrCart
ON
The Cyan toner cartridge is not mounted.
3 (p.155)
Install K TnrCart
ON
The Black toner cartridge is not mounted.
4 (p.156)
Install Photocondctr
ON
The photoconductor unit is not mounted.
5 (p.157)
Photocondctr Trouble
ON
A communication error occurred between PWBA MCU and ANTENNA ASSY (CRUM XERO).
6 (p.158)
An error occurred when writing data to ANTENNA ASSY (CRUM XERO).
7 (p.159)
A photoconductor unit with a memory of different specification device is attached.
8 (p.160)
Wrong Photocondctr
ON
A drum cartridge of a different specification is attached.
9 (p.161)
TonerCart Error Y
ON
A communication error occurred between PWBA MCU and ANTENNA CTRG (CRUM CTRIG).
10 (p.162)
An error occurred when writing data to ANTENNA CTRG (CRUM CTRIG).
11 (p.163)
A Yellow toner cartridge with a memory of different specification device is attached.
12 (p.164)
Wrong Toner Y
ON
A Yellow toner cartridge of a different specification is attached.
13 (p.165)

Table of Contents

Other manuals for Epson AcuLaser CX11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson AcuLaser CX11 and is the answer not in the manual?

Epson AcuLaser CX11 Specifications

General IconGeneral
BrandEpson
ModelAcuLaser CX11
CategoryAll in One Printer
LanguageEnglish

Related product manuals