Epson AcuLaser CX11 - Copy Performance; Document Specifications; Paper Size and Print Area; Supported Papers

EPSON AcuLaser CX11/CX11F Revision B
43
1.2.4.2 Document Specifications
SUPPORTED PAPERS
 Paper type
Plain paper/Semi thick paper/Recycled paper/Laser printer paper/Ink-jet paper
 Paper size
B5/A4/LT/LGL
 Document basic weight (g/m
2
)
50 ~ 124g/m
2
UNSUPPORTED PAPERS
 Paper type
Tracing paper for drafting/Coated paper/Thermal paper/Paper with adhesive/
silicone oil paper/CF paper/Cut-and-patched paper/Processed paper/Thick paper
more than 125g/m
2
.
 Document status
Curled document that are 10 mm or more in width and 20 mm or less in
length.Wrinkled or folded document that are 5 mm or more in width and 20 mm or
less in length.
REMEDY FOR PAPER JAM
If the document is entangled with the roller inside the ADF mechanism, turn the knob
counterclockwise so that the jammed document is ejected to the document tray.
(The knob cannot be turned clockwise)
1.2.5 Copy Performance
1.2.5.1 Paper Size and Print Area
Figure 1-6. Guaranteed Printing Area
NOTE: The scanned area of the original is determined based on the paper size
matching the home position of the original (origin on the document table)
with that of the paper. When the size of the original (original scan area)
exceeds the maximum scan area of the scanner, the original is copied in
the range of the maximum scan area. The scanned area is placed in the
center of the guaranteed printable area with the area beyond the
maximum range cut off.
Table 1-29. Paper Size and Print Area (unit: mm)
Paper Type
Paper Size:
(H x V)
Print Area
a1 b a2 c1 d c2
A4 297 x 210 5 200 5 5 287 5
B5 257 x 182 5 172 5 5 247 5
LGL 215.9 x 355.6 5 205.9 5 5 345.6 5
LT 279.4 x 215.9 5 205.9 5 5 269.4 5
a1
a2b
c1
c2
d
Guaranteed
Printing Area