Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F Revision B
TROUBLESHOOTING Printer 247
FIP-C4
 Panel Message
 Possible parts that caused the error
 PWBA ESS
 Troubleshooting
FIP-C5
 Panel Message
 Service Req C2000
 Possible parts that caused the error
 PWBA ESS
 Troubleshooting
 Service Req C1200  Service Req C1210
Step Check Yes No
1
Check of EEPROM
Initialize the EEPROM. Refer to “Initialization
of EEPROM” (p.69)
Does the error occur?
To Step [2] End of procedure
2
External noise
1. Check the surrounding of the printer for
electrical equipment.
2. Disconnect all cables connected to the
printer, except the AC cable, and make
operation check.
Does the error occur?
Replace the
PWBA ESS.
(p.437)
End of procedure
Step Check Yes No
1
Check of host PC
Restart the host PC.
Does the error occur?
To Step [2] End of procedure
2
Check of Printer Driver
Reinstall the Printer Driver.
Does the error occur?
To Step [3] End of procedure
3
External noise
1. Check the surrounding of the printer for
electrical equipment.
2. Disconnect all cables connected to the
printer, except the AC cable, and make
operation check.
Does the error occur?
Replace the
PWBA ESS.
(p.437)
End of procedure

Epson AcuLaser CX11 Specifications

General

Brand	Epson
Model	AcuLaser CX11
Category	All in One Printer
Language	English