EasyManuals Logo

Epson AcuLaser CX11 Service Manual

Epson AcuLaser CX11
668 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
EPSON AcuLaser CX11/CX11F Revision B
72
8. USB communication mode
D: D4 compatible device
Space:Non D4 compliant device
9. Number of occurrences of jams indicated by JC and 6 figures
10. Number of replacements of Toner Cartridge indicated by IC and 12 figures, and
number of recoveries from errors (Toner Cartridge) indicated by 12 figures.
Maximum number of times: 255
There is a space between the number of replacements and the number of error
recoveries.
Both numbers are indicated in order of C, M, Y, K with 3 figures for each.
When options are installed, the following information on them are added.
1. RAM DIMM : Total amount of memory including the standard RAM is indicated
as “Installed Memory”.
2. Network/IF Board
Settings in "Network Menu" - "Host I/F Settings" are listed.
"Network" is added in the "Interface"
"LAN HW Address", "LAN HW Revision", and "LAN FW Revision" are
added in the "Hardware Configuration".
NOTE: "LAN HW Address" is the Mac address.
"LAN HW Revision" is always 0 (zero).
"LAN FW Revision" is a version of the Planet.
3. 500-sheet Cassette
"Cassette" appears beside "Input Unit" under "Hardware Configuration".
(Complete status sheet and Abridged status sheet)
Figure 1-13. Full Status Sheet
manuals4you.commanuals4you.com

Table of Contents

Other manuals for Epson AcuLaser CX11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson AcuLaser CX11 and is the answer not in the manual?

Epson AcuLaser CX11 Specifications

General IconGeneral
BrandEpson
ModelAcuLaser CX11
CategoryAll in One Printer
LanguageEnglish

Related product manuals