Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F Revision B
DISASSEMBLY AND ASSEMBLY ADF Section 529
4.4.5.3 PAPER SENSOR SWITCH L , PAPER SENSOR SWITCH R
REMOVAL
1. Remove the Scanner. (p306)
2. Remove the ADF Unit. (p481)
3. Remove the ADF COVER R. (p492)
4. Remove the PAPER GUIDE ASSY. (p526)
5. Remove the two screws (M3 x 8 mm, P-type, A-head) that secure the TRAY
COVER to the DOC. PAPER GUIDE.
6. Remove the two screws (M2 x 8 mm, B-type, P-head) that secure the PAPER
SENSOR SWITCH L and PAPER SENSOR SWITCH R to the DOC. PAPER
GUIDE.
7. Pull out the harnesses from the hole of the DOC. PAPER GUIDE, and remove the
PAPER SENSOR SWITCH L and the PAPER SENSOR SWITCH R.
REINSTALLATION
1. Pull the two harnesses for the PAPER SENSOR SWITCH L and PAPER
SENSOR SWITCH R outward through the hole of the DOC. PAPER GUIDE.
2. Secure the PAPER SENSOR SWITCH L and the PAPER SENSOR SWITCH R to
the DOC. PAPER GUIDE with the screw (M2 x 8 mm, B-type, P-head)
respectively.
3. Secure the TRAY COVER to the DOC. PAPER GUIDE with the two screws (M3
x 8 mm, P-type, A-head).
4. Attach the PAPER GUIDE ASSY. (p526)
5. Attach the ADF COVER R. (p492)
6. Attach the ADF Unit. (p481)
7. Install the Scanner. (p306)
Figure 4-224. Removal of PAPER SENSOR SWITCH L/R
PAPER SENSOR
SWITCH L
PAPER SENSOR
SWITCH R
Hole for the Harness of the PAPER SENSOR
SWITCH L/R
DOC. PAPER GUIDE
6)

Epson AcuLaser CX11 Specifications

General

Brand	Epson
Model	AcuLaser CX11
Category	All in One Printer
Language	English