EPSON AcuLaser CX11/CX11F Revision B
TROUBLESHOOTING Printer 245
3.4.4.3.2 Controller related error
FIP-C1
 Panel Message
 Possible parts that caused the error
îš„ PWBA ESS
 Troubleshooting
C H E C K
P O I N T
Since a controller-related service call error may occur due to the
print data structure sent by the host/application, make operation
check while simultaneously changing the operating environment,
print data, etc.
îš„ Service Req C0017 îš„ Service Req C0097
îš„ Service Req C0081 îš„ Service Req C0098
îš„ Service Req C0082 îš„ Service Req C0128-0254
îš„ Service Req C0083 îš„ Service Req C0255
îš„ Service Req C0084 îš„ Service Req C0256
îš„ Service Req C0085 îš„ Service Req C0257
îš„ Service Req C0086 îš„ Service Req C0258
îš„ Service Req C0087 îš„ Service Req C0800
îš„ Service Req C0088 îš„ Service Req C0998
îš„ Service Req C0089 îš„ Service Req C1400
îš„ Service Req C0090 îš„ Service Req C1500
îš„ Service Req C0091 îš„ Service Req C1550
îš„ Service Req C0092 îš„ Service Req C1600
îš„ Service Req C0093 îš„ Service Req C1610
îš„ Service Req C0094 îš„ Service Req C1800
îš„ Service Req C0095 îš„ Service Req C1999
îš„ Service Req C0096
Step Check Yes No
1
External noise
1. Check the surrounding of the printer for
electrical equipment.
2. Disconnect all cables connected to the
printer, except the AC cable, and make
operation check.
Does the error occur?
Replace the
PWBA ESS.
(p.437)
End of procedure