Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F Revision B
APPENDIX Fax Unit System 659
7.7.2 Error List
The error list is given on the following pages.
 “ Service Call Error” (p660)
 “ Operator Call Error” (p662)
 “ Other Error Codes” (p670)
The following is information on the error codes.
 External Error Code
This code consists of main and sub codes and displayed in that order on the fax reports listed below.
1) Activity Report
The code is displayed as "XXX-XXX" on the "Result" column.
2) Fax Setting List
The code is displayed as "XXX-XXX" on the "Error Code" column in the "Error History".
(Example) "300-048"= DCN reception (During faxing, something went wrong with the other end machine and the fax could not be completed)
 Internal Error Code
This code can be checked by the backup data obtained using the "MFP Maintenance Tool".
The code is displayed in two bytes binary form (XXXX) on the "Error Code" column in the "Internal Error History" at the top part of the backup data (TXT data).
(Example) "6F00" = Internal error in process of creating REPORT FILE.
C A U T I O N
The code is displayed on the list only when the operating mode is
set to "Maintenance Mode" by the corresponding system
parameter setting.
manuals4you.com

Epson AcuLaser CX11 Specifications

General

Brand	Epson
Model	AcuLaser CX11
Category	All in One Printer
Language	English