EPSON AcuLaser CX11/CX11F Revision B
69
1.3.4 Special Operations
1.3.4.1 Printer Related Special Operations
LIST OF OPERATING FUNCTIONS
The following is a list of the special operating functions supported by this printer.
SPECIAL FUNCTIONS
The following are items specific to this printer.
 EEPROM Initialization
The information concerning usage amount for each of the toner cartridges, photoconductor unit, and fuser unit are not cleared as they are stored on the engine controller.
C A U T I O N
7
Do not make these functions (except Support mode and panel
setting value initialization) available to users.
Table 1-35. List of Operating Functions
Function Operating procedure
Support mode Hold [Down ] and turn the printer ON.
Initialization of EEPROM Hold [Color], [Reset], and [Left ] and turn the power ON (Check for all of the RAM area is performed).
Initialization of panel settings Hold [Reset] and turn the printer ON.
Update program ROM Hold [Color], [Reset], and [Down ] and turn the printer ON.
Maintenance mode Hold [Left ], [Up ], [Down ], and [Right ] and turn the printer ON.
Update engine program Hold [Color], [Reset], [Up ], and [Down ] and turn the printer ON.
RAM check for all areas [Hold [Color], [Up ], [Left ], and [Right ] and turn the printer ON.
MFP Maintenance Mode Hold [Color], [Up ], [Down ], and [Right ] and turn the printer ON.
Reset CPU when a Service Call occurs When a service call error occurs, hold down [Reset], [Left ], [Up ], [Down ], and [Right ] simultaneously.
Display detailed information when a Service
Call occurs
Press [Reset] , [Left ], and [Right ] when a service call error occurs.