Epson AcuLaser CX11 - Electrical Characteristics; Noise; Power Supply Voltage; Power Consumption

EPSON AcuLaser CX11/CX11F Revision B
21
NOISE
 Sound Pressure
NOTE1: Conforms to ISO-7779 concerning measurement and calculation methods
2: Figures are actual measurement values (when copying in monochrome)
 Sound Power
NOTE1: Conforms to ISO-7779 concerning measurement and calculation methods
2: Figures are actual measurement values (when copying in monochrome)
1.2.1.2 Electrical Characteristics
POWER SUPPLY VOLTAGE
 Power supply operating voltage/frequency
 AC 220V/240V ± 10% : 50Hz/60Hz ± 3Hz
 Power supply for the controller (TBD)
 DC 5.0V ± 5% : 1A or lower
 DC 3.3V ± 5% : AVG 3.0 A
: MAX 4.0 A or lower
 DC 24.0V ± 10% : MAX 1.0 A
POWER CONSUMPTION
The maximum rated current and power consumption are measured with all engine
options and controller options installed.
 Base model/Fax model
Note *: As for the base model, the values are measured when performing printing.
 Scanner consumption current
Table 1-3. Sound Pressure
Model During printing Standby mode Sleep mode
Base model 54dB Background noise Background noise
FAX model 57dB Background noise Background noise
Table 1-4. Sound Power
Model During printing Standby mode Sleep mode
Base model 6.6B Background noise Background noise
FAX model 6.8B Background noise Background noise
120V 240V
Maximum Rated Current 7.5A 4.0A
Power
Consumption
Max. 740W 790W
Continuous copy using ADF
(average)*
Color 189W 191W
Monochrome 287W 294W
Standby (average) (heater ON, scanner lamp OFF) 49W 51W
Low power consumption (average) (heater OFF) 16W 18W
Power switch OFF 0W 0W
Table 1-5. Scanner Consumption Current
Output voltage Without ADF With ADF
24V 0.55A 0.83A
12V 0.07A 0.07A