Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F Revision B
ADJUSTMENT Fax Function 543
RETRIEVING METHOD
Procedure Method
1
Connect the printer with the computer.
After turning the power off for both the printer and computer, connect them with a USB cable.
Before connecting the USB cable, make sure to disconnect other interface cables from the product.
2
Start up the computer and the product. Turn the power ON for both the computer and the product.
3
Start up the tool Start up the Fax Maintenance Tool.
4
Retrieve the user data
Click on the “User Data” tab, and select the “Read user data”, then click the [Start] button.
Select the destination to save the user data in the selection window, and click the [OK] button.
Once the communication and the transaction are started when the MFP Maintenance Tool is executed, the message "Using Fax
Tool" is displayed on the LCD panel.
Note : When the folder already exists in the selected destination, a confirmation message about whether or not to overwrite will appear.
5
Completion of user data read
When retrieving the user data is finished, a completion message will appear.
C A U T I O N
4-3
4-2
4-1
4-4
C A U T I O N
manuals4you.com

Epson AcuLaser CX11 Specifications

General

Brand	Epson
Model	AcuLaser CX11
Category	All in One Printer
Language	English