EPSON AcuLaser CX11/CX11F Revision B
APPENDIX Packaging Specification 586
7.3 Packaging Specification
1. After unpacking, make sure that there is no missing component, and check the
appearance.
2. Then remove all tapes and protection materials.
MAIN UNIT
 Fax Model
C A U T I O N
îš„ Carrying the product should be done by two or more people
keeping it in a horizontal position.
îš„ Since the rear side of the product is heavier than its front side,
be aware of the difference when carrying the product.
îš„ Use extreme care during the installation to avoid an accident
and injury.
1) Main Unit
2) Toner Cartridge (YMCK)
3) POWER CORD
4) Anticounterfeit Label (15 countries)
Note: Photoconductor unit is packed
separately.
3)
1)
2)
4)
manuals4you.commanuals4you.com