Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F Revision B
68
RECEPTION SETUP ITEMS
Note *1: Fax reception settings cannot be changed as long as there are jobs stored in the
memory.
*2: Auto reducing function works all the time.
*3: - DRPD=Distinctive Ring Pattern Detection
- North America only
SPEED DIAL SETUP ITEMS
Note *1: Displays the list of all the registered fax numbers, and indicates the speed dial
numbers not in use. If you wish to change the speed dial number, press Up/Down or
Ten-key until desired number shows up. Press the Right button to select the number.
If unregistered number is chosen, then you can register new fax number. If registered
number is selected, the registered information will be deleted. The registered
information cannot be edited nor corrected. Adding new numbers and deleting the
registered information are possible. In the speed dial register process, fax numbers
should be entered using the Ten-key. To delete the information, press the Right
button after confirmation screens appears. When the information is either deleted or
cleared, the alert screen appears for confirmation.
*2: Fax speed dial settings cannot be changed as long as there are jobs stored in the
memory.
FAX COMMUNICATION MANAGEMENT SETUP ITEMS
Note *: Fax communication management setting cannot be changed as long as there are jobs
stored in the memory.
FAX FACTORY DEFAULT SETUP ITEMS
Note *1: This function returns all fax settings stored on the fax board and reboots the product.
*2: And deletes all unfinished fax jobs stored on the memory.
1.3.3.3 Copy Mode
COPY OPERATION SETUP ITEMS
COPY FACTORY DEFAULT SETUP ITEMS
Setup menu Setup items Remarks
Paper Cassette Auto, MPtray, Cassette ---
Incomming Mode Auto switching, Fax only,
Phone only, TAM
---
Timeout 1 - 99 unit: second(s)
DRPD*3 Normal, All ---
Setup menu Setup items Remarks
Individual Speed Dial Register, Delete 1 - 60
One-touch Dial Register, Delete A - C
Clear Speed Sial No, Yes Clears all the speed dial numbers.
Setup menu Setup items
Activity Report On, Off
Transmission Report At each transmission, On error, Off
Multipie Trans report At each transmission, On error, Off
Setup menu Setup items Remarks
Factory Settings
---
Returns the current settings to
factory default.
Setup menu Setup items Remarks
Standard Settings
---
Sets the current value as a copy job
standard value.
Setup menu Setup items Remarks
Factory Settings
---
Returns the current settings to
factory default.
manuals4you.commanuals4you.com

Epson AcuLaser CX11 Specifications

General

Brand	Epson
Model	AcuLaser CX11
Category	All in One Printer
Language	English