Epson AcuLaser CX11 - Firmware Update

EPSON AcuLaser CX11/CX11F Revision B
ADJUSTMENT Printer Section 534
5.2.2 Firmware Update
This section explains how to update the firmwares.
REQUIRED TOOL
The firmware for the AcuLaser CX11/CX11F can be updated by transferring the
program update data from the PC to the product via USB using a dedicated tool. The
dedicated tool is shown below.
 Name
Firmware Update Tool
Unit Data Format
Updating Method
Panel Operation Tool
Controller (p535) RCC NR Required
CRB Required Required
MCU (p537) BIN Required Required
Color table (p540) RCC NR Required
manuals4you.commanuals4you.com