EPSON AcuLaser CX11/CX11F Revision B
TROUBLESHOOTING Fax Function 295
3.6.4.2 Log Information
Detailed information about troubles on transmitting/receiving faxes also can be
obtained by the following method.
FAX SETTING LIST
In fax mode, press the [Advanced] button to enter the “Printing Report” menu. Select
the “Fax Setting List” in the menu and execute it. Current fax settings for the items
indicated in Table 3-18 are listed and printed out.
The product (fax unit) can be started up in “Maintenance Mode” by changing a certain
parameter setting. If the above operation is performed in “Maintenance Mode”, the
following items are added to the “Fax Setting List”. See “3.6.4.3 System Parameter
Settings” (p298) on how to change the parameter setting.
Job Counter Information
Total counts of transmitted pages
Total counts of received pages
Total counts of transmitted pages in G3 mode (successful jobs)
Total counts of transmitted pages in G3 mode (Unsuccessful jobs)
Total counts of received pages in G3 mode (successful jobs)
Total counts of received pages in G3 mode (Unsuccessful jobs)
System Error History
Number of error occurrences
Date and time of error occurrence
Error code
Table 3-18. Contents of the Fax Setting List (in fax mode)
NO. Item
1 Line Type
2 Dial Mode
3 Personal Number
4 Personal Name
5 Speaker Volume
6 Country
7 Auto Redialing Times
8 Sender Record
9 Answering Mode
10 Ring Response Time
11 Activity Report
12 Transmission Report
13 Multi. Trans. Report
14 Software Version
Fax
Modem
To Next Page
Loading...
Need help?
General
