EPSON AcuLaser CX11/CX11F Revision B
34
1.2.2.3 Paper Specifications
SUPPORTED PAPER TYPE
Standard paper
Monochrome : RX-80 paper (monochrome), 4024 paper (20 lb)
Color : EPSON Color Laser Paper
Plain paper
64g/m
2
~ 105g/m
2
(Commonly used copy paper, recycled paper, high quality plain paper)
Recommended recycled paper: Green100
Special paper
EPSON transparency sheets (A4)
Labels
Thick paper (106 g/m
2
~ 210 g/m
2
)
Envelopes
EPSON coated paper (A4)
PAPER THAT MAY CAUSE PRINTING DEFECTS, PAPER JAMS OR
PRINTER MALFUNCTION
Transfer paper (carbon paper, non-carbon paper), thermal paper, impact paper,
acid paper
Paper that is too thin or too thick
Paper that is wet or damp
Paper with special coatings or color printer paper with processed surfaces
Glossy (too slick) paper, paper with too rough surface , or paper that the roughness
is significantly different between the front side and the back side.
Paper with punch holes or perforations
Creased, curled or torn paper
Irregularly shaped paper or paper with non-perpendicular corners
Labels that peel off easily
Paper with glue, staples or paper clips attached to it
Special paper for ink jet applications (super-fine, glossy, glossy film, etc.)
Paper previously used in a thermal or ink jet printer
Transparencies for other color laser printers or color photocopiers
Paper that has been already printed by other color/monochrome laser printers or
photocopiers
Sheets of paper stuck together
Postcards for ink jet printers, unofficial postcards, and adhesive postcards
Iron print coated paper (for both ink jet and laser printers)
Paper that is deteriorated or discolored, due to temperatures lower than 180 ºC.
C H E C K
P O I N T
7
lb : ream weight = gross weight of 500 sheets of 17” x 22”
sized paper
g/m
2
: 1g/m
2
= 0.2659763lb
Before purchasing a large amount of paper, test the paper if it
can be printed normally.
manuals4you.commanuals4you.com
To Next Page
Loading...
Need help?
General
