Epson AcuLaser CX11 - Page 656

EPSON AcuLaser CX11/CX11F Revision B
APPENDIX Fax Unit System 658
IMAGE DATA PROCESSING
Table 7-21. List of System Parameter (Image Data Processing)
Label
Maintenance
Code
User
Access
Internal
Address
Description Setting Value Default Remarks
Main Sub
IMG_TX_LINE_OR 320 005
---
100
Sub-scanning OR setting when changing resolution
Set whether process of not process sub-scanning OR when changing
resolution to transmit a fax.
0 = Not perform OR process
1 = Perform OR process
Not perform
(0)
Not used
IMG_JBIG_L0 320 006
---
101
102
Number of lines for one stripe of JBIG encoding to transmit a fax 1 to 65535 (lines)
128 lines
(128)
Not used
IMG_JBIG_ATMOVE 320 007
---
103
Maximum horizontal offset allowed for AT pixels in JBIG encoding 0 to 127 0 Not used
IMG_JBIG_TP 320 008
---
104
Use or not use TP for prescribed layers in JBIG encoding
0 = Not use TP
1 = Use TP
Not use TP
(0)
Not used
IMG_DEF_JBIG_LRLTWO 320 009
---
105
LRLTWO value (number of reference lines) in JBIG encoding method
0 = 3 lines
1 = 2 lines
3 lines
(0)
Not used
manuals4you.commanuals4you.com